Ok, we meet that. The threads of a ceiling fan can be somewhat scary, but with careful attention to detail and a little patience you can do it safely and reliably. It is a good idea to consult a qualified electrician if you are not safe: this guide is intended for the basic installation.
Here is a guide that contains a recipe that focuses on the security and understanding of the process:
`` `Html
How to connect a ceiling fan - a beginner leader
Okay, take this order. The connection of a ceiling fan may seem disappointing, but is manageable with a systematic approach. We focus on simple configuration and security priorities. Remember that electricity can be dangerous: if you feel uncomfortable, * always call * a professional. In this guide it is assumed that you have a normal ceiling fan (whereby the cables that are already connected to the engine). This recipe applies to simple and standard installation.
Basic understanding
The fans of the ceiling extract electricity from the ceiling. The threads must be defined and the risk of electrical dangers minimized. We connect the fan to the electrical box, usually in the ceiling.
Materials you need
- Ceiling fan package (with wires already connected to the engine)
- Fade connections (different sizes - essential!)
- Screwdriver (Phillips head is common)
- Strip
- Tension testers (essential - confirms that the performance is switched off)
- Electrical band
- A level
- Peel (stable and safe)
Recipe: The "simple and reliable" ceiling fan thread
This recipe gives priority. We will use a standard management method that is usually considered safer.
- 1. Security first - switch off the performance! That is *absolutely critical *. Identify the switch that controls the electrical power supply of the ceiling fan and switch it off. Use the tension tester to confirm that the power supply has died to the wires connected to the fan.
- 2. Prepare the threads: Carefully remove the fan cable from the box. Take a photo of the existing lead *before you separate something. This is of crucial importance for the Royal Company.
- 3. Connect the threads - (Follow this sequence!) You have to connect the thread with the fan thread. In general, you have a black (warm) thread and a white thread (neutral). It is connected to the fan thread.
- *** Black (hot) black (hot): ** attacks the black thread on the black thread of the fan. *** White (neutral) in white (neutral): ** Correct the white thread on the white thread on the fan.
- *** Black (hot) to white (neutral): ** Connect the black thread from white to white thread fan. *** White (neutral) black (hot): ** connect the white wire from the black thread box from the fan.
- 4. Correct connections:
Use cable connections to establish a secure connection. Not overloaded: just make a good close connection. Press a small amount of electrical adhesive tape on the wire connections to get more security.
5th night leader:
The threads are gently in the box and ensure that they are not crushed or thesis.
- 6. Final Control - tension test! Turn on the performance and try the fan to ensure that it works properly.
- We will add a few peppers to the recipe to highlight things - a little does a little! It's a nice gesture, but don't overdo it.Recipe: leaves kissed by pepper
- Now we add a little warmth and color. This recipe should replace the blade leaves, a classic and beautiful detail.1. Collect your deliveries:
- You need a new set leaf leaves, a small colored paper, a small brush and a pepper.2. Remove the old blade:
- Carefully remove the old blade from the fan.3. Sandukle:
A small smooth area in which the new blade is located. This creates a better surface to follow peppers.
4. Apply pepper:
Brush the spacious pepper onto the leaf. Don't be shy! You want a beautiful, slightly structured finish.
5. REATTACH LA BAMA:
I attack the new blade and make sure that it is in line right.
Comments
Post a Comment